Difference between revisions of "Orange Pi Zero"

Revision as of 21:08, 13 August 2020

Orange Pi Zero is a small headless ARM computer.

#	Component
1	26-pin GPIO
2	Serial port: GND, RX, TX (left to right)
3	RJ45 Ethernet port
4	USB 2.0 port
5	13-pin expansion port
6	WiFi antenna
7	XR819 WiFi controller
8	Pulse H1102NL Signal Transformer for the Ethernet port
9	Allwinner Technology H2+ SoC
10	256/512 MB DDR3 SDRAM (256 MB in the photo)
11	micro-USB port (power and data)
12	? LED
13	Power LED

Supports GPIO, I2C, SPI, UART
Pinout diagram
Resources: Python GPIO library
WiringOP - Orange Pi equivalent of Raspberry Pi's WiringPi
- Dynamical GPIO layout: gpio readall
- WiringOP-Zero with support for on board LED (otherwise outdated)

USB Bluetooth dongle (e.g. RTL8821CU) (not supported by the built-in module)
USB Wifi dongle (e.g. RTL8821CU)
- to access the 5 GHz band (not supported by the built-in module)
- for packet sniffing or network proxy (not supported by the built-in module)
I2C OLED display SSD1306
- to show the system status (CPU usage, IP address etc.)
- Dejvino/SSD1306 (minimalistic status display in C)
- Additional resources: SSD1306 for OrangePiZero, Rust SSD1306 library, Python OLED library
SPI TFT display
- as a framebuffer screen fbtft (previously supported directly in Linux kernel up to 5.4[1], [2])
- Resources: Raspberry Pi display, ST7735 display, ST7735S
- TODO: [3]

@@ Line 77: / Line 77: @@
 ** {{todo|[https://github.com/nopnop2002/wiringpi-tft-tool]}}
+== Operating System ==
+* [[Armbian on Orange Pi Zero]]
 == External Links ==