Difference between revisions of "PostmarketOS on PinePhone"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
# Install ''pmbootstrap''[https://wiki.postmarketos.org/wiki/Installing_pmbootstrap] | # Install ''pmbootstrap''[https://wiki.postmarketos.org/wiki/Installing_pmbootstrap] | ||
# Build an image[https://wiki.postmarketos.org/wiki/Installation_guide] | # Build an image[https://wiki.postmarketos.org/wiki/Installation_guide] | ||
| + | ## {{code|1=pmbootstrap init | ||
| + | Vendor: pine64 | ||
| + | Device: pinephone | ||
| + | ...}} | ||
# (optional) Connect the [[PinePhone]]'s eMMC via [[PinePhone_Software#Jumpdrive|Jumpdrive]] if you want to flash it there | # (optional) Connect the [[PinePhone]]'s eMMC via [[PinePhone_Software#Jumpdrive|Jumpdrive]] if you want to flash it there | ||
# Flash the image: {{code|1=pmbootstrap install --sdcard=/dev/mmcblk2}} | # Flash the image: {{code|1=pmbootstrap install --sdcard=/dev/mmcblk2}} | ||
Revision as of 12:50, 23 May 2020
Using postmarketOS on a PinePhone.
Installation
You can use pre-built demo images, but the preferred way is to build your own image.
Vendor: pine64
Device: pinephone
...
- (optional) Connect the PinePhone's eMMC via Jumpdrive if you want to flash it there
- Flash the image:
pmbootstrap install --sdcard=/dev/mmcblk2
