Difference between revisions of "Orange Pi Zero"

Revision as of 20:09, 29 July 2020

Orange Pi Zero is a small headless ARM computer.

#	Component
1	26-pin GPIO
2	Serial port: GND, RX, TX (left to right)
3	RJ45 Ethernet port
4	USB 2.0 port
5	13-pin expansion port
6	WiFi antenna
7	XR819 WiFi controller
8	Pulse H1102NL Signal Transformer for the Ethernet port
9	Allwinner Technology H2+ SoC
10	256/512 MB DDR3 SDRAM (256 MB in the photo)
11	micro-USB port (power and data)
12	? LED
13	Power LED

USB Bluetooth dongle (e.g. RTL8821CU) (not supported by the built-in module)
USB Wifi dongle (e.g. RTL8821CU)
- to access the 5 GHz band (not supported by the built-in module)
- for packet sniffing or network proxy (not supported by the built-in module)
I2C OLED display SSD1306
- to show the system status (CPU usage, IP address etc.)
- Dejvino/SSD1306 (minimalistic status display in C)
- Additional resources: SSD1306 for OrangePiZero, Rust SSD1306 library, Python OLED library
SPI TFT display
- as a framebuffer screen [1]

@@ Line 69: / Line 69: @@
 ** [https://github.com/Dejvino/SSD1306 Dejvino/SSD1306] (minimalistic status display in C)
 ** Additional resources: [https://github.com/vadzimyatskevich/SSD1306 SSD1306 for OrangePiZero], [https://github.com/jamwaffles/ssd1306 Rust SSD1306 library], [https://github.com/rm-hull/luma.oled Python OLED library]
+* [[SPI]] [[TFT]] display
+** as a framebuffer screen [https://kaspars.net/blog/spi-display-orange-pi-zero]
 == External Links ==