Difference between revisions of "Linux kernel on Orange Pi 4"

From Dejvino's Knowledge Base
Jump to navigation Jump to search
 
(11 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
'''Prerequisite:''' [[U-Boot on Orange Pi 4]]
 
'''Prerequisite:''' [[U-Boot on Orange Pi 4]]
  
−
'''Next steps:''' [[RootFS on Orange Pi 4]]
+
'''Next steps:''' [[Linux rootfs on Orange Pi 4]]
  
 
{{Todo|THIS!}}
 
{{Todo|THIS!}}
 +
 +
== Overview ==
 +
In order to build a [[Linux kernel]] you'll need:
 +
# Linux kernel source
 +
# (optional) Patches to add support for the specific hardware
 +
# Cross-compilation toolchain if building on a different device than [[Orange Pi 4]]
 +
 +
== Setup ==
 +
=== Linux kernel ===
 +
{{Todo|Git clone}}
 +
 +
=== Kernel patches ===
 +
{{Todo|Switch to a [[Mainline Linux]]. Right now we're using a [[BSP Linux kernel]] which already supports [[Orange Pi 4]].}}
 +
 +
{{Todo|...orangepi-4.dtb was not added to the ...arch/arm64/boot/dts/rockchip/Makefile}}
 +
 +
=== Cross-compilation ===
 +
This is needed only if you're building on a different architecture, e.g. on an x86_64 computer.
 +
 +
{{Todo|Linaro + instructions?}}
 +
 +
<pre>CROSS_COMPILE=/path/to/toolchain/bin/aarch64-linux-gnu-</pre>
  
 
== Compiling ==
 
== Compiling ==
−
...
+
{{Todo|compilation}}
 +
 
 +
Generate .config file
 +
<pre>cd linux
 +
make ARCH=arm64 CROSS_COMPILE=$CROSS_COMPILE rk3399_linux_defconfig</pre>
 +
 
 +
Compile the kernel
 +
<pre>CORES=4 # number of CPU cores
 +
make ARCH=arm64 CROSS_COMPILE=$CROSS_COMPILE -j${CORES} rk3399-orangepi.img</pre>
 +
 
 +
To compile DTBs, most notably {{code|rk3399-orangepi-4.dtb}}:
 +
{{code-block|1=
 +
make ARCH=arm64 CROSS_COMPILE=$CROSS_COMPILE dtbs
 +
}}
 +
 
 +
You should see something like this at the end of the compilation:
 +
<pre>Pack to resource.img successed!
 +
  Image:  resource.img (with rk3399-orangepi.dtb logo.bmp logo_kernel.bmp) is ready
 +
  Image:  boot.img (with Image resource.img) is ready
 +
  Image:  zboot.img (with Image.lz4 resource.img) is ready</pre>
 +
 
 +
{{Todo|Customize boot logo.}}
 +
 
 +
{{Todo|Modules? Img to flash? boot.img}}
  
 
== Flashing ==
 
== Flashing ==
 +
{{Todo|Building an SD Card image file would be better}}
 +
{{Todo|Don't flash the kernel. Ignore this for now}}
 
<pre>dd if=boot.img of=sdb seek=32768</pre>
 
<pre>dd if=boot.img of=sdb seek=32768</pre>
 +
 +
== Related ==
 +
* [[BSP Linux on Orange Pi 4]]
  
 
== External Links ==
 
== External Links ==
−
* Rockchip Kernel [opensource.rock-chips.com/wiki_Rockchip_Kernel]
+
* [[Mainline Linux]] kernel [https://www.kernel.org/]
 +
** Github mirror [https://github.com/torvalds/linux]
 +
* [[Rockchip]] Kernel [http://opensource.rock-chips.com/wiki_Rockchip_Kernel]
 +
* [[Xunlong]] [[BSP kernel]] [https://github.com/orangepi-xunlong/OrangePiRK3399_kernel]
 +
** instructions for older [[Orange Pi|Orange Pis]] [http://www.orangepi.org/Docs/Building.html]
 +
** compilation script [https://github.com/orangepi-xunlong/OrangePiRK3399_scripts/blob/master/kernel_compile.sh]
 +
* [[Armbian]] kernel patches [https://github.com/armbian/build/tree/master/patch/kernel]

Latest revision as of 00:03, 29 March 2020

Using Linux kernel on an Orange Pi 4.

This page is focused just on building a kernel. For the related required components, see Linux on Orange Pi 4.

Prerequisite: U-Boot on Orange Pi 4

Next steps: Linux rootfs on Orange Pi 4

TODO: THIS!

Overview

In order to build a Linux kernel you'll need:

  1. Linux kernel source
  2. (optional) Patches to add support for the specific hardware
  3. Cross-compilation toolchain if building on a different device than Orange Pi 4

Setup

Linux kernel

TODO: Git clone

Kernel patches

TODO: Switch to a Mainline Linux. Right now we're using a BSP Linux kernel which already supports Orange Pi 4.

TODO: ...orangepi-4.dtb was not added to the ...arch/arm64/boot/dts/rockchip/Makefile

Cross-compilation

This is needed only if you're building on a different architecture, e.g. on an x86_64 computer.

TODO: Linaro + instructions? 

CROSS_COMPILE=/path/to/toolchain/bin/aarch64-linux-gnu-

Compiling

TODO: compilation

Generate .config file 

cd linux
make ARCH=arm64 CROSS_COMPILE=$CROSS_COMPILE rk3399_linux_defconfig

Compile the kernel 

CORES=4 # number of CPU cores
make ARCH=arm64 CROSS_COMPILE=$CROSS_COMPILE -j${CORES} rk3399-orangepi.img

To compile DTBs, most notably rk3399-orangepi-4.dtb: make ARCH=arm64 CROSS_COMPILE=$CROSS_COMPILE dtbs

You should see something like this at the end of the compilation: 

Pack to resource.img successed!
  Image:  resource.img (with rk3399-orangepi.dtb logo.bmp logo_kernel.bmp) is ready
  Image:  boot.img (with Image resource.img) is ready
  Image:  zboot.img (with Image.lz4 resource.img) is ready

TODO: Customize boot logo.

TODO: Modules? Img to flash? boot.img

Flashing

TODO: Building an SD Card image file would be better TODO: Don't flash the kernel. Ignore this for now 

dd if=boot.img of=sdb seek=32768

Related

External Links

Retrieved from "https://kb.d5o.eu/index.php?title=Linux_kernel_on_Orange_Pi_4&oldid=233"